|
BI-BT50 Mazda BT-50 2011+ inc CCD Reversing Camera and Postage Vic, NSW, SA | |
Postage for WA, Remote Qld, FNQ | Upgrade camera to Sensor Camera | Upgrade camera to IPAS (Intelligent Park Assist) Camera (as pictured below) | ODB2 Wireless Sender (click for details) | Tyre Pressure Monitor Sender (click for more detail) |
Ozi Explorer Off Road 1:250K Aust wide
mapping
(will need to purchase your individual licence direct from Ozi Explorer) |
Express Post - Victoria only - Due to size ALL other states are POI | Stereo Removal tools |
General Features | |
Processing System | Windows CE 6.0 |
Support the 3D virtual Navigation | Yes |
Topographical Maps Supported | Yes |
Dual Zone Entertainment | Yes |
Original Factory Panel Design | Yes |
Maintain Audio Steering Wheel Controls | Yes |
SD Card Capacity SD | 8GB |
Day/Night Colour Mode | Yes |
High Speed Auto Re-Route | Yes |
Built-in Games | NO |
Backlight Dimmer Mode | Yes |
Supported Multimedia Files | VCD/DIVX/MPEG4/AVI/WMV/WMA/MP3/WMA/JPEG |
Supports Forward and Reverse Camera | Reverse Camera |
Auxiliary Inputs AUX | Yes |
Bi-directional Copying of Files Supported | Yes - USB Flash/SD card to Built-in NAND Flash |
Skin Change Supported | Yes |
Bluetooth Control | |
Bluetooth Ready | Yes |
Bluetooth Version | A2DP |
Hands Free Call | Yes |
Audio Streaming | Yes |
Microphone Position | External |
Phone Book Function | Yes |
USB | |
Position USB | FRONT |
USB Inputs Available USB | 1 |
USB Speed USB | High-Speed USB 2.0 (480Mbps) |
MP3/WMA/WAV Compatible MP3/WMA/WAV | Yes |
DIVX® Compatible DIVX | Yes |
Tuner | |
RDS Radio Information RDS | Yes |
Built-in Radio Booster | Yes |
Receive Frequency Wave Band: | FM: 87.5MHz~1080MHz AM: 522kHz~1620kHz |
Hardware Specifications | |
DDR RAM | 128MB 600MHz |
Built-in Memory | 128MB NAND Flash |
GPS Processor GPS | SiRF Prima 800Mhz CPU |
GPS Platform GPS | Advanced ARM 11 architecture |
Supported Disk Format | DVD-ROM,DVD-Video, DVD-R(Video Mode) /RW (Video Mode),CD-ROM,Cd-Da,CD-R/RW |
Supports Original Car Amplifier (if applicable) | Yes |
Amplifier | Max output 45W×4, 4Ω×4 |
Working Temperature | -20°C to +60°C |
Display Specifications | |
Touch Screen Panel | Yes |
Screen Resolution (Pixels) | 1024 x 600 HD Resolution |
Supported Video Resolution (Pixels): | NTSC: 720x480/ PAL: 720x576 |
Display Brightness | 400cd/m2 |
View Angle | 60° (left, right), 40° (top), 60° (bottom) |
Multi-Lingual Display | Yes |
I cannot push the fascia and monitor back.
You will need to add a 40mm hole for cabling. Failing to do this may crack the monitor which is not covered with warranty.
None of the buttons on my dash or steering wheel work.
There is a plug going into the back of your existing LCD screen in your vehicle. On the DIG Options Premium system this needs to be plugged into the back of the CD/DVD part on the system from DIG Options.
How do i program the steering wheel buttons?
Enter Settings, Wheel, Password 0000.
Start with Key 1. Select for example VOL +. Touch Match on screen. Hold Steering wheel Button for VOL +. Push Save.
Repeat for all buttons.
The Radio is no good
Mazda BT-50s can have up to 3 antenna plugs. you need to find the correct one by trial and error. The correct one unplugs from the original LCD screen in the car and is usually black. Please ensure RDS radio settings and region settings are set to your region (ie Australia). To get to the RDS settings you need to go into settings/factory settings, the password is 0000. then choose RDS.
You will need to power up the Vehicle's AM Radio Booster. To do this locate the thick white wire with red trace in the vehicle loom. From the DIG Options stereo connect up the Blue Power Antenna / Auto ANT wire to that. It will power your car's booster.
Timezone is wrong
You need to go into settings/factory settings, the password is 0000. then choose timezone. also check the timezone is correct within the street navigation program.
1. Full Existing Parking Sensor/Aircon
Compatibility
2. Australian Warranty from DIG Options with a
reputation of over 6 years and thousands of
positive online reviews
3. Works with all steering wheel buttons including Bluetooth
Wiring / Installation Notes:
The unit will come with Plug and Play wiring for power /
speakers / steering etc for your car
MANUALS:
READ THE
FULL USER MANUAL