CARAVAN GPS SPECIAL
7" GPS - $500 Complete |
Spiral Cable |
+ Choice of the following for the car / 4WD
CMOS CAMERAS
+ Choice of
Truck /Van Round caravan Caravan Camera
NB the round caravan camera must be flush mounted.
The monitor:
This GPS mirror has fitting for most cars and replaces the existing
mirror. Power is usually taken from the interior lights but this
of course varies from vehicle to vehicle. For more details simply
click on the image of the mirror. The mirror is sent with
latest street mapping. Ozi Explorer (with full Aust wide mapping)
is offered as an option
The cameras:
The system is supplied
with 1 x CMOS camera and 1 x CCD camera.
The CMOS is for reversing
The CCD is for viewing the camera looking down the road whilst driving.
The Cables:
The system is supplied with
2 x 7.5M cable for inside the vehicle
1 x 15M cable to the back of the caravan. (if you think
this is too long you can either coil this up or simply
request a 10M cable.
Powering this up is a breeze. Your installer will simply connect this to a power supply in your car and run the cables all the way back to the cameras. The
car camera is powered from any accessories power or
reversing lights. The caravan will either be
powered from your existing connector, or if you take the
spiral connector option you then your caravan camera
will be powered by accessories in the car.
The system can be made to come on automatically in
reverse but if towing the trip wire should not be
connected as you will see the hitching post in reverse.
Wiring hint: The
green trigger wire, when powered, will activate camera 2 (your car
camera). When connected this system you can either not connect
this wire or connect it via a switch. Otherwise when reversing
your caravan you will see the image coming out of the car.
Spiral connector Add $ 70
Add the spiral connector for $70. The connectors come with covers and screw on connections making them the very best on the market.