TM-700 - not currently available |
|
Sunvisor 7" LCD - this is the ONLY legal way of doing this in Australia
Excellent for most 4WD - super thin design
NB THIS UNIT IS IN BLACK
Sun Visor Monitor
Features/Specifications: |
- TM-700ZA
Super Slim 7-Inch Sun-Visor Clip TFT LCD
Monitor 270mm x 130mm
- General Features:
- Sun-Visor Mobile
Video Monitor
- Panel: TFT 7-inch
- Color LCD monitor
- 16:9 AU
- System: NTSC / PAL
- Can be attached to
the sun-visor of an automobile
- High luminance up to
350 - 400 cd/m2
- Remote control with
OSD menu
|
Package Includes: |
- TM-700ZA
Super Slim 7-Inch Sun-Visor Clip TFT LCD
Monitor
- Color camera (if
purchased below)
- Video/Power cable
- Remote control
-
Instruction Manual
|
Additional Information: |
-
Requirements:
- Available 12 volt
DC power line
- Installation
(professional installation recommended)
- Notes:
- Model: TM-700ZA
- This monitor has no
audio input, and no speaker, despite what
the manual states. It has one composite
video inputs.
- Professional
installation highly recommended for camera.
-
CAUTION: Camera backup systems are not a
substitute for physically visually checking
behind your car when backing up.
|
Camera Options:
Bullet Number Plate Miniature
Tailgate A
Miniature Tailgate B
Heavy Duty Butterfly
Caravan Camera
Miniature Tailgate C
Camera Options
|
CMOS
|
Bullet
CMOS |
|
Number Plate
CMOS
|
|
Miniature Tailgate
A CMOS |
|
Truck / Van
|
|
Miniature Tailgate C CCD |
|
First Camera is automatically supplied with a 6M RCA cable
Second Camera is supplied with both 6M and 15M RCA cabling
GENERAL CONNECTIONS FOR ALL RCA MONITORS:
Both Camera and monitor need to be powered by connecting
Red - Positive
Black - Negative
If the power cable does not have Red/Black wires then
you will need to test using a multi meter. The inside
of the plug is positive, the outside negative
Some monitors may also have a green wire which, when
connected to the positive side of the reversing light
will make the camera display on input no 2. If
connecting a second camera then this wire should not be
connected (or a simple switch put in to disable it when
the second camera is connected). The monitor can be
manually turned on to display the camera at any time and
can be left on whilst driving.
The connection between the camera and the monitor is via
a simple RCA cable. Only the YELLOW is used.
If more instructions are needed then you
should be getting this unit professionally installed
Of course all items supplied should be tested BEFORE
installation.
|